Email: info@theshotblasting.com
ISO 9001:2015 Certified
Need a machine?Request a quote
Menu
Applications
All applications Casting cleaning Plate and beam descaling Pipe blasting Shot peening Coating removal Deburring and deflashing Internal pipe cleaning Weld cleaning
Send your requirement Partner login
  1. Home
  2. Deburring and deflashing

Application

Deburring and deflashing

Flash, burrs and sharp edges on small to medium parts. Tumblast, barrel, table or cabinet.

This is flash and burrs — not a heavy foundry clean. See Casting cleaning

Get Quote
Deburring and deflashing

Typical parts

What buyers usually send for this job.

  • Flash and sharp edges on castings
  • Small to medium die-cast or sand-cast parts
  • Batches that can tumble or sit on a table

Machines for this job

Send size, material and finish — we will confirm the fit from the current range.

How we match the machine

Four things that decide tumblast, hanger, table, conveyor or a room.

  1. Part size

    Tumblast or barrel for parts that can tumble. Table or cabinet when edges must stay precise.

  2. Material

    Iron, steel and aluminium — cycle time is shorter than a heavy clean.

  3. Finish

    Flash and burrs off without eating the part. Tell us if a sharp edge must stay.

  4. What we need

    Part size, alloy, batch size, and how much flash is on the part.

Related spare parts

Wear parts already listed against the machine families on this job. Send the model so we can confirm fit.

View all spare parts

Which industries use this job

Only the plants we already supply for deburring and deflashing.

Automotive Plants and component shops that need a repeatable finish before coating or assembly. Foundry Foundries that clean castings before machining, coating or dispatch. Aluminum castings Casting shops finishing aluminium parts before machine or coat.

Questions buyers ask

Machine, finish and what we need to quote deburring and deflashing.

01 Which machine for deburring?
Tumblast or rotary barrel for small parts that can tumble. Table or cabinet when parts are flat, fragile or must not knock.
02 Will blasting change the dimensions?
A short cycle removes flash and burrs. If a face is already machined, tell us — we keep the cycle light.
03 What finish should we ask for?
Edges cleaned, flash gone, ready to machine or assemble. Not a paint Sa grade unless you need that next.
04 What do you need for a quote?
Part size, alloy, how many per batch, and a photo or note of the flash if you have one.

No payment on this site · Engineer reply typically within 30 minutes

Other process jobs we match to a machine.

View all applications