Email: info@theshotblasting.com
ISO 9001:2015 Certified
Need a machine?Request a quote
Menu
Applications
All applications Casting cleaning Plate and beam descaling Pipe blasting Shot peening Coating removal Deburring and deflashing Internal pipe cleaning Weld cleaning
Send your requirement Partner login
  1. Home
  2. Plate and beam descaling

Application

Plate and beam descaling

Mill scale on plates and sections before primer. Conveyor, wheel or room for the line.

This is mill scale on plates and beams — not foundry casting cleaning. See Casting cleaning

Get Quote
Plate and beam descaling

Typical parts

What buyers usually send for this job.

  • MS plates before primer
  • Beams and structural sections
  • Shop-length fabrications on a conveyor

Machines for this job

Send size, material and finish — we will confirm the fit from the current range.

How we match the machine

Four things that decide tumblast, hanger, table, conveyor or a room.

  1. Section size

    Plates and beams on a roller conveyor. Odd lengths or mixed sections often need a room.

  2. Finish

    Mill scale off to a paint-ready surface. Say if you need Sa 2.5 or another spec.

  3. Throughput

    A continuous line if the same section repeats. A room if jobs change every shift.

  4. What we need

    Plate or beam size, length, tonnes per hour, and the paint spec.

Related spare parts

Wear parts already listed against the machine families on this job. Send the model so we can confirm fit.

View all spare parts

Which industries use this job

Only the plants we already supply for plate and beam descaling.

Construction Fabricators and contractors preparing structural steel before primer. Steel fabrication Fabrication shops blasting before paint so sections meet the spec. Shipbuilding Shipyards and marine fabricators cleaning steel before primer.

Questions buyers ask

Machine, finish and what we need to quote plate and beam descaling.

01 Which machine for plates and beams?
A roller conveyor is the usual shop line. A wheel machine or room is used when lengths or shapes do not suit a conveyor. Portable only for site work.
02 What finish should we ask for?
Most primer jobs ask for mill scale removed to Sa 2.5. If you do not have a spec yet, send the paint system and we will confirm.
03 What do you need for a quote?
Width, thickness, length, tonnes per hour, and whether the line is indoor.
04 Can a conveyor take mixed sections?
Yes within a size window. Very short pieces or heavy fabrications may need a room instead — we will say after we see the range.

No payment on this site · Engineer reply typically within 30 minutes

Other process jobs we match to a machine.

View all applications