Email: info@theshotblasting.com
ISO 9001:2015 Certified
Need a machine?Request a quote
Menu
Applications
All applications Casting cleaning Plate and beam descaling Pipe blasting Shot peening Coating removal Deburring and deflashing Internal pipe cleaning Weld cleaning
Send your requirement Partner login
  1. Home
  2. Casting cleaning

Application

Casting cleaning

Sand, scale and flash on castings. Tumblast, hanger, barrel or table depending on part size.

This is sand and flash on castings — not mill scale on plates and beams. See Plate and beam descaling

Get Quote
Casting cleaning

Typical parts

What buyers usually send for this job.

  • Sand-cast housings and blocks
  • Small to mid-size foundry batches
  • Iron and aluminium castings before machine or coat

Machines for this job

Send size, material and finish — we will confirm the fit from the current range.

How we match the machine

Four things that decide tumblast, hanger, table, conveyor or a room.

  1. Part size

    Small mixed batches usually go tumblast or barrel. Larger or fragile castings go hanger or table.

  2. Material

    Grey iron, steel and aluminium — media and cycle change with the alloy.

  3. Finish

    Sand, scale and flash off so the part can be machined, coated or dispatched.

  4. What we need

    Size, weight, alloy, and whether this is a foundry cell or a jobbing mix.

Related spare parts

Wear parts already listed against the machine families on this job. Send the model so we can confirm fit.

View all spare parts

Which industries use this job

Only the plants we already supply for casting cleaning.

Automotive Plants and component shops that need a repeatable finish before coating or assembly. Foundry Foundries that clean castings before machining, coating or dispatch. Construction Fabricators and contractors preparing structural steel before primer.

Questions buyers ask

Machine, finish and what we need to quote casting cleaning.

01 Which machine for casting cleaning?
Tumblast or rotary barrel for small batches that can tumble. Hanger or table when parts are larger, hollow or must not knock each other. We confirm from size and alloy.
02 What finish do foundries usually ask for?
Sand and scale removed so the casting can be machined or coated. We only quote a Sa grade if you specify one.
03 What do you need for a quote?
Part size and weight, alloy, how many per hour or per shift, and indoor or outdoor install.
04 Can one line clean iron and aluminium?
Sometimes, with a media and cycle change. Tell us both alloys — we will say if one machine is enough.

No payment on this site · Engineer reply typically within 30 minutes

Other process jobs we match to a machine.

View all applications