Email: info@theshotblasting.com
ISO 9001:2015 Certified
Need a machine?Request a quote
Menu
Applications
All applications Casting cleaning Plate and beam descaling Pipe blasting Shot peening Coating removal Deburring and deflashing Internal pipe cleaning Weld cleaning
Send your requirement Partner login
  1. Home
  2. Internal pipe cleaning

Application

Internal pipe cleaning

ID blast on pipe and tube before lining. Internal-pipe or pipe machine for the bore.

This is the bore (ID). Outside diameter is a different job. See Pipe blasting

Get Quote
Internal pipe cleaning

Typical parts

What buyers usually send for this job.

  • Pipe and tube ID before lining
  • Bores that a standard OD line cannot reach
  • Shop-length pipe with a stated ID range

Machines for this job

Send size, material and finish — we will confirm the fit from the current range.

How we match the machine

Four things that decide tumblast, hanger, table, conveyor or a room.

  1. Bore size

    An internal-pipe machine for the ID. A pipe machine only if OD is in the same order.

  2. Length

    Tell us the longest stick — that sets the lance and handling.

  3. Finish

    ID clean for lining or inspection. Send the lining spec if you have one.

  4. What we need

    ID range, length, pipes per hour, and whether OD is also in scope.

Related spare parts

Wear parts already listed against the machine families on this job. Send the model so we can confirm fit.

View all spare parts

Which industries use this job

Only the plants we already supply for internal pipe cleaning.

Oil & gas Oil and gas fabricators blasting pipe and structural steel before coating. Steel fabrication Fabrication shops blasting before paint so sections meet the spec. Shipbuilding Shipyards and marine fabricators cleaning steel before primer.

Questions buyers ask

Machine, finish and what we need to quote internal pipe cleaning.

01 Which machine for internal pipe cleaning?
An internal pipe blasting machine for the bore. A standard pipe machine is for OD. We quote both only if you need both.
02 What ID range can you cover?
It depends on the lance and the pipe length. Send the ID min/max and the longest stick — we will say if one machine covers it.
03 What finish is usual before lining?
A clean, dry ID ready for the lining system. Send that spec if you have it.
04 What do you need for a quote?
ID range, length, how many pipes per hour, and whether OD blasting is required too.

No payment on this site · Engineer reply typically within 30 minutes

Other process jobs we match to a machine.

View all applications